Motis Talon Wedge

Description

Motis 7075 “Talon” Wedge

The door that won’t gap

You’ve made the gap. Now you need to hold it. A cheap wedge slips, bends, or spits out under pressure, and the gap you worked for closes. That costs you time in the fatal funnel.

You shouldn’t have to wonder whether your gear will hold. Your gear should be the one thing you can trust.

Built from a harder material

Most aluminum wedges are made from 6061 aluminum. It’s common, it’s cheap, and it’s soft by comparison. The Talon is machined from 7075 aluminum, the same class of alloy used in aircraft structures. It is significantly stronger than 6061, so you get a wedge that stands up to hard use without adding weight to your kit.

Shaped to hold

The curved Talon profile is designed for one job: to bite into a gap and stay there. It doesn’t sit flat and hope. It grabs.

What you get

• 7075 aluminum, significantly stronger than standard 6061 wedges
• A high strength to weight ratio that stays light on your kit and holds up under hard use
• A curved profile built to maximize effectiveness when forcing a gap
• A compact size, approx. 5″ L x 1 5/8″ W x 1 3/16″ H
• Approx. 6 oz
• Black or FDE Tan to match your loadout

The math is simple

One failed wedge at the wrong moment costs more than a pouch full of good ones. Buy it once, trust it every time, and put your attention on the entry, not on your equipment.

Stop gambling on soft metal. Carry the Talon.